Grade 316 (A4) Stainless Steel Remedial Ties (Grade 1.4401)
100 Tie Kits
 
This austenitic grade of stainless steel helical remedial wall tie is recommended for highly corrosive areas such as marine locations or heavily polluted industrial environments. 
 
Kit Contents:
 
-  100Nr Grade 316 (A4) Helical Ties
-  Standard 2-Piece Installation Tool
-  SDS+ Masonry Drill Bit.
 
What Length of Helical Tie?
​​
Tie Length    
Min Cavity Size    
Max Cavity Size
170mm
0mm
5mm
195mm
5mm
25mm
220mm
30mm
50mm
245mm
55mm
75mm
270mm
80mm
100mm
300mm
105mm
130mm
320mm
130mm
150mm
345mm
155mm
175mm
370mm
180mm
200mm
400mm
205mm
230mm
425mm
235mm
255mm
450mm
260mm
280mm
 
Please watch our installation video and view our installation guide.
 
Other Info:
 
For a fast and low-cost way to finish the pilot holes after installation, use Titan Ties Injectable Repair Mortar. If an exact colour match to existing masonry is required, consider using SureStain Colour Matching Mortar.
 
SDS+ Drill Bits (for forming the pilot hole) are supplied as part of the kit- We sell 5.5mm diameter for 170mm-270mm ties and 6mm diameter for tie lengths of 300mm upwards. We can supply other diameters on request. Pro kits come with duplicate drill bits and setting tools.
 
Helical ties must have a minimum embedment in the inner (load bearing) leaf of 70mm
 
Pilot holes will be between 5.5mm and 6.5mm. 
 
We recommend that you test the strength of substrate before choosing the appropriate drill hole
 
Above table assumes that facing brickwork is 110mm wide imperial brickwork (make adjustment for small widths / 100mm metric bricks).
 
Helical mechanical wall ties should be fixed into the centre of bricks- not mortar joints. The masonry should be sound. House covered in render / pebble dash? Consider resin ties if mortar joints are not visible or there are concerns about masonry condition.
 
Wall ties being replaced should be removed or isolated.